• Buying a "High Quality Return Air Filter Media Pad" for a Air Conditioner or Heater Furnace is very important for your Home or Office Air Conditioning & Heater Furnace system.
• Poor Quality Filters fibres can’t be washed or vacuum cleaned.
• The Fibres will seperate and block the evaporator coil,thus damaging your system.
• Once you have changed your air filter Media Pad for your home.
• You will save on: Electricity, Maintenance & Have Clean air you can Breathe!
  

           Ordering Your Size is Simple........

Measure the outside of your existing frame.

(YouTube video attached above for you to watch)

Free Delivery Aust Wide

1. Pick the AirCon Filter material/media pad size closest to the outside frame  measurement from the drop down above and then Order.
2. We will then post your order the same day or the next Business day.
3. Once received.Open the bag and lay the new filter material on a flat surface.Lay the frame over the new material and then cut around the frame with a pair of scissors.
4. Pull the rubber spline out by lifting from one corner and slowly pull around the frame.
5.  Remove the old filter material/media  and dispose of it, but keep the rubber spline to reuse.
6. Place the new AirCon Filter media/material pad over the frame & push the rubber spline back into the channel with the air filter material.
7.  Trim the excess filter material with a pair of scissors.
8. Now you are ready to put your New Clean AirCon Filter back into the return air grille vent & turn on.

AirCon Filters fibres offers the Highest Quality Australian Made thermally bonded polyester fibre.

Our filter media G2 & G3 Certified have been designed for residential and commercial reverse cycle ducted air conditioning systems & Heating systems,exhausts, extended configurations.

G3 Rated Certified Filter Media ( ACF 275 ) according to Australian Standard AS1324.1.

Our G3 Media provides a superior filtration standard to HVAC filters as it has a tighter weave pattern, this results in a greater level of filtration. The tighter weave also prevents smaller particles from entering your air conditioning system (larger pollens etc). As G3 rated filter catches more particulate (dust etc) it may need cleaning and/or replacement more frequently than our standard filter media. G3 media will leave your air cleaner than our standard filter media. If you are an asthma or hay-fever sufferer we recommend using our G3 filters.

Physical Characteristics & Technical Data 

Thermally bonded polyester fibre.

Vacuum & washable

RATED AIR
VELOCITY 1.78 m/s

CLEAN AIR
RESISTANCE 49 Pa

NOMINAL
THICKNESS variants,between 11-15 mm

FINAL AIR
RESISTANCE 250 Pa

DUST HOLDING
CAPACITY 435 g/m2

MAXIMUM SERVICE
TEMPERATURE 150°C

AVERAGE
ARRESTANCE
ESTIMATE
( TEST DUST #4 ) 85% approx.

COLOUR Grey

G2 Rated Certified Filter Media ( ACF 170) according to Australian Standard AS1324.1.

Physical Characteristics & Technical Data

G2 Rated Filter Media ( ACF 170 )

Thermally bonded polyester fibre.

Vacuum & washable

RATED AIR

VELOCITY  1.78 m/s 

CLEAN AIR
RESISTANCE  23 - 33 Pa

NOMINAL
THICKNESS  variants10-12 mm

FINAL AIR
RESISTANCE 250 Pa

MAXIMUM SERVICE
TEMPERATURE 120°C

AVERAGE
ARRESTANCE
ESTIMATE
( TEST DUST #4 ) 70% approx.

COLOUR Grey